DC12V, COB 756leds/m led strip light, Non-waterproof, 4.5M/Roll,10mm PCB,14W/M,4 pin female connector on one side.(15FT)
$0.00
| DC12V, COB 756leds/m led strip light, Non-waterproof, 4.5M/Roll,10mm PCB,14W/M,4 pin female connector on one side.(15FT) |
23
Items sold in last 3 hours
Description
- Voltage: DC12V – This LED strip operates on a 12-volt DC (Direct Current) power source.
- LED Type: COB (Chip-on-Board) – COB LEDs are known for their high brightness and uniform light output.
- LED Density: 480 LEDs per meter – This LED strip has a high density of 480 individual LEDs per meter of length, providing bright illumination.
- Waterproofing: Non-waterproof – The LED strip is not designed to be water-resistant or waterproof, so it should be used in dry environments only.
- Length: 4.5 meters per roll – Each roll of this LED strip is 4.5 meters (approximately 14.8 feet) long.
- PCB Width: 8mm – The printed circuit board (PCB) on which the LEDs are mounted has a width of 8mm.
- Power Consumption: 11W/M – This LED strip consumes 11 watts of power per meter of length, providing efficient lighting.
- Connector: DC female connector on one side – One end of the LED strip has a DC female connector, making it easy to connect to a power source or controller.
- Cable Length: 15 feet – The cable attached to the DC female connector is 15 feet long, allowing for flexibility in placement and installation.
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.