DC24V, COB 480leds/m led strip light,IP67 solid silicone extrusion, 5M/Roll,8mm PCB,11W/M, DC female connector on one side.(16FT)
$0.00
| Power per Meter | 11 W/m |
|---|---|
| Input Voltage | DC 24V |
| Length | 5 m / roll, 16 FT |
| LED Chips | COB |
| LED Density | 480 LEDs/m |
| PCB Width | 8 mm |
| Connector | DC female connector on one side |
| IP Rating | IP67 |
| Features | Solid silicone extrusion |
Specification Sheet
21
Items sold in last 3 hours
Description
- Voltage: DC24V – This LED strip operates on a 24-volt DC (Direct Current) power source, providing higher voltage compared to typical 12V LED strips.
- LED Type: COB (Chip-on-Board) – COB LEDs are known for their high brightness and even light distribution.
- LED Density: 480 LEDs per meter – This LED strip is highly dense, with 480 individual LEDs per meter of length.
- Waterproofing: IP67 solid silicone extrusion – This LED strip is rated as IP67, which means it is highly resistant to dust and can be submerged in water up to 1 meter for a short duration without damage. The solid silicone extrusion provides protection against moisture and environmental factors.
- Length: 5 meters per roll – Each roll of this LED strip is 5 meters long.
- PCB Width: 8mm – The printed circuit board (PCB) on which the LEDs are mounted has a width of 8mm.
- Power Consumption: 11W/M – This LED strip consumes 11 watts of power per meter of length.
- Connector: DC female connector on one side – One end of the LED strip has a DC female connector, making it easy to connect to a power source or controller.
- Cable Length: 16 feet – The cable attached to the DC female connector is 16 feet long.
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.